Other Supplies: 12mm Fairy Petals Bead Cap (Vintaj Item# ABC0001R) (ABC0001), 17mm x 16.5mm Watchful Bird (Vintaj Item# ADP0014R) (ADP0014), 27mm x 25mm Heart Circlet (Vintaj Item# AP0010), 31mm x 22mm Beech Leaves Right (Vintaj Item# AFS0003), 43mm x 13.5mm Skeleton Key (Vintaj Item# AP0004R) (AP0004), 44.5mm x 32.5mm Etruscan Antiquity (Vintaj Item# AP0012R) (AP0012), 1/8" Nail Head Rivet (Vintaj Item# RV0001), Vintaj Glaze (Vintaj Item# VPK34834), 1.5mm Hole Punch Pliers (Vintaj Item# V-PLHP15-SH), Steel Bench Block (Vintaj Item# V-BB44), Rubber Dampening Block (Vintaj Item# V-RDB1249), 4-oz. Ball Pein Hammer (Vintaj Item# V-HAM01), Beads, Chain, Jump Rings
Emboss a Square Vintaj Natural Brass Altered Metal blank using the Moonlit Night DecoEmboss die. Buff with the Metal Reliefing block to highlight the raised designs. Punch or drill three additional holes in the lower portion of the embossed blank as shown in the image. Punch or drill matching holes in the Etruscan Antiquity embellishment. Punch or drill holes in the Arte Metal Beech Leaves and Watchful Bird for linking. Rivet the Beech Leaves to the bottom center of the Etruscan Antiquity embellishment and the embossed Square blank. Rivet the Etruscan Antiquity embellishment and the embossed Square blank together closing up the three other drilled holes. Dangle beads from the bottom of the Beech Leaves. Attach to a larger jump ring to form a pendant. Create the necklace by linking the pendant, Heart Circlet, beads and capped beads and a clasp onto chain. Bend and form the Art Metal Skeleton Key into a toggle bar and attach it to one end of the necklace strands. Pair it with the Heart Circlet to function as a toggle clasp. If desired, Vintaj Glaze can be used as a sealer for natural metals to prevent oxidation. It is fast-drying, durable and permanent with a satin finish.
