Artist:
Themes:
Barnyard Friends Wall Hanging
Project #14880
Print Project
Overview
Created with simple felt, this project is anything but ordinary, and you can complete it quickly and easily with the instructions below.
Products Used
658328-Sizzix Bigz XL 25" Die - Strips, 2 1/2" Wide 658330-Sizzix Bigz Pro 25" Die - Strips, 2 1/2" Wide 659341-Sizzix Bigz Pro Die - Barnyard FriendsOverview
Created with simple felt, this project is anything but ordinary, and you can complete it quickly and easily with the instructions below.
Artist:
Themes:
Instructions
Fabric Requirements:
| Yardage | Fabric | Cutting Instructions |
| Fat 1/4 | Blue denim | Cut (1) 14" Square for the background |
| 7" x 6" | Red wool | Cut (1) Barn Cut (1) Rooster Comb |
| 8" x 5" | Blue wool | Cut (1) Horse |
| 4" x 4" | Light blue wool | Cut (1) Saddle |
| 3 1/2" x 7" | Yellow wool | Cut (1) Sun Cut (1) Corn |
| 5" x 5" | White wool | Cut (1) Ram |
| 4" x 4" | Green wool | Cut (1) Corn Husk |
| 6" x 3" | Tan wool | Cut (1) Rooster Cut (1) Ram Horn |
| 2" x 5" | Gray wool | Cut (1) Barn Roof |
| 1/3 yd | Blue plaid flannel | Cut (4) 2 1/2" wide Strips x 24" |
| 1/4 yd | Binding fabric | Cut (3) 2 1/2" wide Strips x WOF |
| 2/3 yd | Backing fabric | |
| 22" x 22" | Batting | |
| Assorted embroidery floss |
Notes:
- Finished Size: 18" x 18"
- All seam allowances are 1/4" unless noted.
- Fat 1/4 = approximately 18" x 21"
- WOF = width of fabric
Assembling the Project:
- Arrange the shapes in a pleasing manner on the background. When satisfied with the arrangement, sew shapes to the background using a blanket stitch.
- Fold background fabric in half. Fold in half again to find the center points along each side of the perimeter of the background and press the center points. Unfold fabric. Take each 2 1/2" x 24" Strip, fold in half widthwise, and press a crease to find the middle. Match up the pressed folds on the each side of the background with crease marks on the border Strips and pin.
- Sew the 2 1/2" x 24" Strips to the background, leaving a 1/4" from each end. Miter the corners.
Finishing:
- Layer the backing, batting and quilt top. Quilt by hand or machine, as desired.
- Sew binding strips together to form one long strip. Fold wrong sides together, lengthwise, and press.
- With a 1/4" seam, sew the raw edges of the binding to the edges of the right side of the quilt. Turn the folded edge of the binding to the back side of the quilt and stitch in place by hand, mitering the corners.
