You will never look at garlands the same way again. Making this garland DIY is as easy as 1-2-3! Follow the steps below to see how fast this garland comes together with just a few supplies.

Finished Size: 2 1/2" x 9'

Die Required:    800002 Sizzix® Bigz™ Die - Circles, 1 1/2", 2" & 2 1/2"


Fabric Requirements:

Yardage                Fabric                                                                                    Cutting Instructions

(3) Fat 1/4           Different pinks                                                                  Cut (30) 2 1/2" Circles*

Cut (30) 2 1/2" Circles

1 package            White ribbon

1 package            Fusible adhesive



Fat 1/4 = approximately 18" x 22"

* = Cut each fat 1/4 in half. Adhere fusible adhesive to back of fabric before die-cutting the shapes.


Assembling the Project:

  1. Line up the adhesive-backed Circles, wrong side up, about 1" apart on an ironing surface.
  2. Place the ribbon across the Circles.
  3. Lay the remaining Circles, wrong side down, on top of the first Circles, sandwiching the ribbon in between.
  4. Heat fuse the Circles together with an iron to form the garland.