Other Supplies: 1/4" Nail Head Rivets (Vintaj Item# RV010R) (RV010), 4mm Jump Ring/Spacers (Vintaj Item# JR10), 4.75mm Jump Rings (Vintaj Item# JR20R), 7.25mm Jump Rings (Vintaj Item# JR40R), 15mm Jump Ring (Vintaj Item# JR60R) (JR60), 32mm Etruscan Kaleidoscope (Vintaj Item# P140), 4mm Circle Spacer Bead / Crimp Cover (Vintaj Item# BD170), 7mm Flower Petal Bead Cap (Vintaj Item# BC60), 9mm Square Tag Altered Blank (Vintaj Item# DP0002R) (DP0002), Vintaj Glaze (Vintaj Item# VPK34834), 1.5mm Hole Punch Pliers (Vintaj Item# V-PLHP15-SH), Steel Bench Block (Vintaj Item# V-BB44), Rubber Dampening Block (Vintaj Item# V-RDB1249), 4-oz. Ball Pein Hammer (Vintaj Item# V-HAM01), Beads, Clasp, Decorative Rings
Emboss four Square Tags and a 29mm Square Vintaj Natural Brass Altered Metal blank using the Deco Motif DecoEmboss die. Buff each blank with the Metal Reliefing block to highlight the raised designs. Punch or drill an additional hole in the lower portion of the embossed 29mm Square blank as shown in the image. Punch matching holes in the Etruscan Kaleidoscope decorative pendant. Rivet two flattened Flower Petal Bead Caps to the embossed 29mm Square blank layered over the Etruscan Kaleidoscope decorative pendant to form flowers. Attach jump rings to the upper corners to form a centerpiece for the necklace. Punch or drill additional holes in the embossed Square Tag blanks as shown in the image. For added interest, create decorative rings by stringing circle spacer beads and 4mm jump ring/spacers onto a larger jump ring. Create the necklace by linking a variety of beads, decorative jump rings, embossed Square Tag blanks and jump rings. Attach each side of the necklace to the centerpiece. Attach a clasp at each end of the back of the necklace. If desired, Vintaj Glaze can be used as a sealer for natural metals to prevent oxidation. It is fast-drying, durable and permanent with a satin finish.
