Other Supplies: 15mm Jump Ring (Vintaj Item# JR60R) (JR60), 19mm Tiny Artisan Star (Vintaj Item# P0500R) (P0500), 27mm Token Feather (Vintaj Item# ADP0025), 36mm x 36.5mm Skyward Bird (Vintaj Item# P0050R) (P0050), 4.75mm Jump Rings (Vintaj Item# JR20R) (JR20), 52mm x 17mm Feathered Left Wing (Vintaj Item# P0047R) (P0047), 9mm Square Tag Altered Blank (Vintaj Item# DP0002R) (DP0002), Vintaj Glaze (Vintaj Item# VPK34834), Vintaj Patina - Verdigris (Vintaj Item# VPK34827), 1.5mm Hole Punch Pliers (Vintaj Item# V-PLHP15-SH), Bead Caps, Beads, Chain, Clasp
Emboss a Skyward Bird Vintaj Natural Brass Altered Metal blank using the Nouveau Roses DecoEmboss die. Emboss a Feathered Left Wing Vintaj Natural Brass Altered Metal blank using the Cherry Blossom Garden DecoEmboss die. Emboss two Square Tags and one Artisan Star using the Lowercase Handwriting DecoEtch die. Use a paint brush to apply Verdigris Vintaj Patina to the Square Tags and Artisan Star etched blanks and use a paper towel to remove the paint while it is still wet, leaving it only in the impressions to accentuate the design. Buff with the Metal Reliefing block to highlight the raised designs. Punch or drill additional holes in the blanks for linking. Attach the embossed Skyward Bird blank to a large jump ring using a smaller jump ring to form a dangling pendant. From the bottom of the Skyward Bird pendant, dangle a variety of letter etched blanks and beads. Create the necklace by linking a variety of beads, capped beads, a Token Feather charm, an embossed Feathered Left Wing blank and jump rings onto chain. Attach each side of the necklace to the pendant. Attach a clasp at the end of each beaded strand. If desired, Vintaj Glaze can be used as a sealer for natural metals to prevent oxidation. It is fast-drying, durable and permanent with a satin finish.
